FAQ

DRYSURF

About product performance

Our DRYSURF products cause no negative impact on most resin and rubber. However, it depends on the shape and grade of resin or rubber, so please test it in advance before fully applying it for the intended purpose. (In the brochure, you can find the data from our in-house tests on major products and major resins.)

DRYSURF is made of active ingredient (lubrication agent) and the liquid (solvent). When applied, it dries instantly, leaving a thin and uniform lubrication layer. It causes little running or staining, and durable even with thin layer. Please click here for details.

It depends on the condition of use (material of the surface, load, etc.) and also by product. The product has been used in sliding parts that repeats the motion for tens to hundreds thousands times. Please contact our sales representative so that we can suggest the best product for you.

With a few exceptions, all products are non-hazardous and can be transported by air. *DRYSURF A-2107 series and some others are hazardous materials. For flash point,
please see the SDS for each product or click here.

About handling of the products

We set warranty period starting from the date of manufacture (for unopened products only). Warranty period differs depending on product type:
DRYSURF completely dry type - 2 years
DRYSURF semi-dry type - 3 years
DRYSURF oil barrier type - 2 years
DRYSURF dust trap type - 2 years
Click here to check warranty period for major products.

Although we set warranty period only for unopened products, it does not mean the product degrades quickly once opened. We assume that if the product is tightly stoppered while avoiding dust contamination and stored in dark, cold place, it should be fine to use for similar period of time as unopened product.

It is optimal to tightly stopper the container and store it in dark, cold place. (see the instruction manual)

We have dedicated diluent for some products.
Please contact us for details.

Using containers with small opening (such as square flask) or container with depth will reduce volatilization (by making the steam easier to stay inside).

The information can be found on the labels on carton boxes and cans. The lot number tells you the manufacturing date together with expiry date.
(e.g.) 150501AI -> 2015 May 1

It depends on the shape of surface and application method, but when applied on flat surface with a brush, it takes less than one minute. However, it does not apply to some products (DRYSURF A-2107 series, MF-2400EL, etc.) using slow-drying solvent. Also, when applying on bumpy surface or on elastomer and other materials that easily absorb the solvent. Please check it in actual use.

Color development with black light is possible.
The recommended wave length is around 360mm.

About purchasing products

If you want to buy the product, please call us or contact us from here.
Please share the information of end users or where the demand comes from for us to respond to you in a timely manner.

It is possible to get our products outside Japan. Please tell us which products you need, the amount needed, purchase volume and destination and we will inform you the best method. Please call us or contact us from here.

We only show selected products on our website.
For those products not listed there, please call us or contact us from here.

DRYSURF takes 21 days for Ex-Works after order placement on average.
If you have any request date for delivery, please let us know when your placing an order.

DRYSURF is sold in 1kg cans. Packaging configuration is as follows:

DRYSURF 1kg x 6cans (W205×H170×L255mm, Total weight 7.1kg) or 10cans (W255×H170×L340mm Total weight: 11.8kg)

Document request

Others

HI-LUBE

HI-LUBE (fluorinated grade) has no negative impact on most resin and rubber, and HI-LUBE (synthetic oil grade) has little impact on most products.
However, it may be subject to the shape of resin/rubber and grade, so please check it in actual use. (In the brochure, you can find the data from our in-house tests on major products and major resins.)

It depends on the condition of use (material of the surface, load, etc.), but it lasts for tens to hundreds thousands of times (or millions in some case) of sliding if appropriate product is used. Please contact our sales representative so that we can s

About handling of the products

We set warranty period starting from the date of manufacture (for unopened products only). Warranty period differs depending on product type:
HI-LUBE synthetic oil grease - 2 years
HI-LUBE fluorinated grease - 3 years
HI-LUBE synthetic oil impregnation oil - 2 years
HI-LUBE fluorinated impregnation oil - 3 years
Click here to check warranty period for major products.

Although we set warranty period only for unopened products, it does not mean the product degrades quickly once opened.
We assume that if the product is tightly stoppered while avoiding dust contamination and stored in dark, cold place, it should be fine to use for similar period of time as unopened product.

It is optimal to tightly stopper the container and store in dark, cold place. (Please refer to the instruction manual)

About purchasing products

It is possible to get our products outside Japan. Please tell us which products you need, the amount needed, purchase volume and destination and we will inform you the best method.
Please call us or contact us from here.

We only show selected products on our website. For those products not listed there,
please call us or contact us from here.

HI-LUBE takes 30 days for Ex-Works after order placement on average.
If you have any request date for delivery, please let us know when your placing an order.

HI-LUBE is sold in 1kg cans and 15kg pails for synthetic oil grease, 1kg polyethylene bottles for fluorinated grease. Packaging configuration is as follows:
HI-LUBE (fluorinated grease) 1kg polyethylene bottle x 6 bottles (W225×H165×L225mm Total weight 7.2kg) or 10 bottles (W225×H165×L550mm Total weight 11.8kg)
HI-LUBE (synthetic oil grease) 1kg can x 6cans (W245×H180×L360mm Total weight 7.5kg)
HI-LUBE (synthetic oil grease) 15kg cans (W330×H390×L320mm Total weight 17.6kg)

Document request

Others

DURASURF

DURASURF is a line of fluorinated coatings and water/oil repellent agents. We have a variety of products available for the purpose of moisture proofing, water proofing, insulation, rust proofing, stain proofing, oil repelling, ink repelling, etc. The name "DURASURF" is a combination of durability and surface.

About handling of the products

We set warranty period starting from the date of manufacture, which is 1~2 years for most of the products (for unopened ones only).
The period defers by product, so please contact us from here for details.

Although we set warranty period only for unopened products, it does not mean the product degrades quickly once opened.
We assume that if the product is tightly stoppered while avoiding dust contamination and stored in dark, cold place without direct sunlight, it should be fine to use for similar period of time as unopened product. (Specialty products such as pre-treatment agent and primers are excluded.)

Tightly stopper the container and store in room temperature, avoiding direct sunlight. Storage temperature should be below 40℃.

The information can be found on product label. The lot number tells you the manufacturing date.
(e.g.) 170501 -> 2017 May 1

About purchasing products

If you want to buy the product, please call us or contact us from here.
Please share the information of end users or where the demand comes from for us to respond to you in a timely manner.。

It is possible to get our products outside Japan.
Please tell us which products you need, the amount needed, purchase volume and destination and we will inform you the best method.
Please call us or contact us from here.

We only show selected products on our website. For those products not listed there,
please call us or contact us from here.

DURASURF takes 21 days for Ex-Works after order placement on average.
If you have any request date for delivery, please let us know when your placing an order.

DURASURF is sold in 1kg plastic bottles, 1kg glass jars and 20kg pails.

Document request

Others

About purchasing products

We only show selected products on our website. For those products not listed there,
please call us or contact us from here.


Others